IJsbad met koeler: zo werkt een chiller

Ice bath with chiller: how a chiller works

Flamengo wellness and recovery brand logo
Lifestyle · Cold therapy

Ice bath with chiller: how a chiller works

A chiller turns your ice bath from something you have to prepare into something that's always ready. You set a temperature and the bath holds it – this morning, tonight and next week. In this article: how a chiller works, which temperature to choose and how to pick one.

An ice bath with a chiller is the difference between cold therapy as a project and cold therapy as a habit. Without a chiller you control the temperature with ice, which means hauling, waiting and watching the water warm up again every single session. With a chiller you set what you want, and that's what you get. In this article we explain how such a unit works, which temperature suits which level, and which specifications to look at when choosing one.

What is an ice bath chiller?

A chiller – also called a cooler or water chiller – is a separate unit that sits next to your bath and keeps the water at a set temperature. Two hoses go into the bath: one draws water in, the other returns it chilled. Nothing else is needed: no built-in installation, no plumbing, just an earthed socket.

The idea is simple but the effect is big. Where a bath with ice takes half an hour of preparation, a bath with a chiller is always ready. You walk outside, lift the lid and get in. That sounds like a detail, but in practice it's exactly what decides whether cold therapy becomes a habit or stays a nice experiment.

Six points to compare an ice bath with chiller - cooling capacity lowest setting filter controls weather resistance and size

Six specifications that make the difference between chillers – including where it will stand.

How a chiller works

A chiller uses the same technology as a refrigeration system: a compressor moves heat from one side to the other. The water flowing through the unit gives off its heat, and that heat is released into the outside air via the fan.

How an ice bath chiller works - the bath the pump and filter the cooling unit and back into the bath

A closed loop: bath, filter, cooling unit, back into the bath.

Good to know: the unit doesn't run continuously. As soon as the set temperature is reached, it switches off. Only when the water warms up by a degree – from the sun, the outside temperature or because you've been sitting in it – does it kick in again. That's why energy use is lower than people expect based on its power rating.

Practical tip: the lid does more work here than the unit. A closed, insulated bath holds its temperature so well that the chiller only needs to run for a fraction of the day.

What is an electric ice bath?

You'll often come across the term electric ice bath, and it simply means a bath with a chiller. The bath itself isn't electric – it's just a tub of water. All the electronics are in the separate unit next to it.

That separation is handy, because it means you choose the order yourself. You can start with the bath, work with ice or cold tap water for a season, and add the chiller later once you notice you're using it regularly. It also works the other way round: if you already have a bath, a chiller is a separate add-on.

How much electricity does it use?

That depends on the power consumption and on how many hours a day the unit actually runs. For an insulated bath with a lid, that comes to roughly one to two kilowatt-hours a day in summer – a matter of pennies. In winter the outdoor water is already cold and the unit barely needs to kick in, so consumption drops even further.

Compare that with ice: to get 450 litres properly cold you're talking tens of kilos of ice per session. Read more about that trade-off in buying an ice bath: what to look out for.

Which temperature should you set?

This is where a chiller really pays off: you can build up precisely instead of guessing. With ice every session is a surprise; with a chiller you lower it by a degree each week and notice for yourself when it's enough.

Which temperature to set on an ice bath with chiller - from beginner to experienced

Build up in steps. Most people end up between eight and twelve degrees.

For the first few weeks, start at around twelve to fifteen degrees with sessions of thirty to sixty seconds. The goal isn't to grit your teeth but to keep your breathing calm. Once that works, go down to eight to twelve degrees and extend to two to three minutes. For most people that's the sweet spot where it stays pleasant and sustainable.

Want to go further? Five to eight degrees is where experienced users sit, with sessions of two to five minutes. Going colder adds little for most people: below five degrees it's mainly about experience and having someone nearby, not about extra effect.

And the Wim Hof method?

It doesn't prescribe a fixed temperature. The emphasis is on breathing and gradual adaptation, not on a number. In practice, beginners often work at around ten to fifteen degrees. With a chiller you can reproduce exactly what felt good last time – and that's precisely what makes a gradual build-up easier.

Cooling and filtering in one device

Water that is being pumped around can be filtered at the same time. That's why many chillers have a built-in filter: the water passes through the filter before it enters the cooling unit.

In practice that makes a big difference. You don't need a separate filter pump with a second set of hoses, and the water stays clear for longer. With filtration you usually only need to change the water completely every one to two months, rather than every few days.

When comparing, do check how accessible the filter is. A filter you can take out without tools and rinse under the tap is one you'll actually clean. If it's tucked away behind a panel, in practice it tends to get neglected.

Two habits do the rest: a quick rinse in the shower before you get in, and putting the lid on as soon as you're out. Together they do more than any product.

How do you compare chillers?

On paper, chillers look alike. These six points make the difference in practice:

Specification Why it matters
Cooling capacity (W) Determines how quickly the water cools and whether the unit keeps up on a warm day. Note: this is not the same as power consumption.
Lowest temperature setting How low can it go? Three degrees gives room to grow, even if you'll rarely go that far.
Built-in filter Saves a separate pump, a second set of hoses and a lot of water changes. Check whether the filter is easy to remove.
Controls Only a display on the unit, or an app as well? With an app you can bring the bath to temperature from inside the house.
Placement A chiller should stand somewhere dry. Plan for a spot under a canopy, a shelter or in a shed, with enough space for air circulation.
Size and weight It stands next to the bath and needs moving now and then. Handles and anti-slip feet help.

Also look at the difference between cooling capacity and power consumption. A good unit delivers more cooling than the electricity it uses, because it moves heat rather than generating it. If the specifications list two figures, that's a good sign: it means the manufacturer measures both.

The PolarPure Chiller

Our PolarPure Chiller is designed to work with the PolarPlunge ice bath, but also works as a standalone unit next to any bath of a similar size.

Specification PolarPure Chiller
Cooling capacity 810 W
Power consumption 495 W
Compressor 290 W — 1/3 hp
Lowest temperature Down to 3 °C
Filter Built in, easy to clean
Controls Via display or app (iOS and Android)
Material Carbon steel with stainless steel
Water resistance IPX4 — splash-proof, not resistant to sustained rain
Dimensions and weight 41 x 30 x 36 cm · approx. 19 kg
Stability Anti-slip pads with handles

Place the unit somewhere dry. IPX4 means it can handle splashes – water splashing from the bath or the odd shower blowing against it – but a chiller isn't made to stand permanently exposed to the elements. A spot under a canopy, against the wall under the eaves, or in a shed next to the patio is ideal. Do leave space all around so the fan can get rid of its heat.

The 810 W cooling capacity against 495 W power consumption is where the efficiency lies: the unit moves more heat than it uses in electricity. And because the filter is built in, you don't need to buy a separate filter pump – cooling and keeping clean happen in the same loop.

To be honest about what it doesn't do: the unit cools, it doesn't heat. If you want to alternate hot and cold, combine the bath with a heat source, for example via our contrast therapy set.

Good to know before you start
  • Consult your doctor first if you have a heart condition, high blood pressure, Raynaud's phenomenon or epilepsy;
  • If you are pregnant, consult your midwife or GP first;
  • Build up in steps: start at around 12 to 15 degrees with short sessions;
  • Get out if you experience severe shivering, dizziness or numbness;
  • Don't get into the water alone while cold water still feels unfamiliar.

Frequently asked questions about an ice bath with chiller

How does an ice bath chiller work?

A pump draws water from the bath, which passes through a filter and then through the cooling unit, where a compressor extracts the heat. The chilled water flows back into the bath. Once the set temperature is reached, the unit switches off and only kicks in again when the water warms up.

What is an electric ice bath?

That's the common term for an ice bath with a chiller. The bath itself isn't electric: all the technology is in the separate unit next to it. That means you can start with the bath and add the chiller later, or buy a chiller separately for a bath you already have.

How much electricity does an ice bath chiller use?

For an insulated bath with a lid, that comes to roughly one to two kilowatt-hours a day in summer. The unit only runs when the water needs to be cooled back down. In winter the outdoor water is already cold and consumption largely disappears.

What is the best temperature for an ice bath?

Start at around twelve to fifteen degrees with short sessions and gradually go lower. Most people end up between eight and twelve degrees with sessions of two to three minutes. Colder than five degrees rarely adds anything and requires experience plus someone nearby.

What's the difference between cooling capacity and power consumption?

Cooling capacity is how much heat the unit removes from the water; power consumption is how much electricity it uses to do so. A good chiller delivers more cooling than it consumes, because it moves heat rather than generating it. For our unit that's 810 watts against 495 watts.

Do I need a filter pump as well as a chiller?

Not if the filter is built into the chiller. The water then passes through the filter within the same loop, so you don't need a second pump or extra hoses. If the unit has no filter, a separate filter pump is recommended to keep the water clear.

Can the chiller stay outside?

Outside, yes, but not unprotected in the rain. IPX4 means splash-proof, not resistant to sustained precipitation. Place the unit under a canopy, against the wall under the eaves or in a shed next to the bath. Leave space all around for air circulation and make sure it stands level.

Can a chiller also heat the water?

Ours can't: it cools down to three degrees and doesn't heat. If you want to alternate hot and cold, combine the ice bath with a separate heat source. That's exactly how contrast therapy is built up in practice: a warm session followed by a short cold one.

Flamengo wellness logo

Conclusion

A chiller makes your ice bath something that's always ready. You set a temperature, the unit holds it, and you can build up step by step instead of guessing with ice every session. When comparing, look at cooling capacity versus power consumption, the lowest setting and above all whether the filter is built in – the latter saves a second device and a lot of water changes. Start gently at twelve to fifteen degrees and go down a degree each week. Where you end up is up to you; most people settle somewhere between eight and twelve degrees, and that's just right.

Want to experience it yourself?
PolarPlunge ice bath with PolarPure Chiller

810 W cooling capacity, down to 3 °C, built-in filter and app control. Water that's always at temperature.

View the ice bath with chiller →
Fast delivery · 14-day cooling-off period · Chiller can also be combined separately
Back to blog
1 of 3